RU-MLB2P
Mic/Line Bi-Directional Network Interface
- Interfaces Two Dante Inputs and Two Dante Outputs
- Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
- Each Input is Switch-Selectable for Mic or Line
- No User or Installer Gain Adjustments are Required
- Automatic Microphone Gain of 40 dB for Condenser Mics and 60 dB for Dynamic Mics
- P48 Phantom is Provided on Each Microphone Input
- Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with > 18 dB Headroom
- Front-Panel Signal LED for Each Audio Input
- Converts Two Dante Network Audio Signals to Balanced Line Level
- Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
- Signal LEDs Indicate Audio for Each of the Received Network Signal Channels
- High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
- LED Indicators Show Network Sync Status
- Normal or Hot-Standby Operation from PoE (Model RU-MLB2P)
- Equipped for Rack Mounting or Surface Mounting
The RU-MLB2 is a high-quality converter that provides professional line-level outputs from two Dante network received audio channels. It also converts two professional or consumer line-level sources, or dynamic or condenser microphones to Dante network audio channels.
Network to Line Level Interface Section
The RU-MLB2 converts two audio sources to Dante networked digital audio channels. Each input is equipped with a rear-panel input selector the installer sets to mic or line. In the mic position, the balanced input provides P48 phantom to an associated microphone jack. Connection of a dynamic microphone sets the preamplifier gain to 60 dB. Connection of a condenser microphone sets the gain to 40 dB. The automatic gain setting is always active so that no user adjustment is required when changing microphones. In the line position, the balanced input accepts a standard +4 dBu source, and the unbalanced line input terminals accept a -10 dBV source for normal operating level. Separate wiring terminals are provided for balanced and unbalances sources. A front-panel variable-intensity LED indicator is provided for each of the two inputs to facilitate setup.
The RU-MLB2P is equipped to operate from a PoE enabled network switch. The RU-MLB2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.
The RU-MLB2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.
| Network Connector: | RJ45 with Link and Speed indicators |
| Digital Audio Ethernet Protocol: | Dante |
| Transmission Rate: | 100 Mbps |
| Sample Rates Supported: | 44.1 kHz, 48 kHz (default) |
| Bit Depth Supported: | 24 bits |
| Audio Operating Levels: | -18 dBFS = +4 dBu |
Mic/Line Inputs to Network Interface Section |
|
Mic Inputs |
|
| Inputs (2): | Balanced, detachable terminal block |
| Gain: | Automatic; 40 dB for condenser mics, 60 dB for dynamique mics |
| Input Level for +4 dBu: | 56 dBu (dynamic), -36 dBu maximum; -36 dBu (condenser), -19 dBu maximum (unclipped), -14 dBu maximum (soft clipped) |
| Input Impedance: | > 1 kΩ |
| Phantom Power: | P48, 48 Vdc |
| Standard for Phantom: | IEC 61938: 2013 |
| Frequency Response: | 20 Hz to 20 kHz (± 0.5 dB) |
| THD+N: | < 0.1% |
| Noise below +4 dBu: | < -70 dB |
| CMRR: | > 70 dB (50 to 120 Hz) |
| Crosstalk: | < 70 dB (20 to 20 kHz) |
Line Inputs |
|
| Inputs (4): | Balanced, detachable terminal block (2); Unbalanced, detachable terminal block (2) |
| Input Level for +4 dBu: | +4 dBu (balanced); -10 dBV (unbalanced) |
| Input Impedance: | > 20 kΩ |
| Frequency Response: | 20 Hz to 20 kHz (± 0.5 dB) |
| THD+N: | < 0.1% |
| Noise below +4 dBu: | < -75 dB |
| CMRR: | > 60 dB (50 Hz to 120 Hz) |
| Crosstalk: | < 75 dB (1 kHz, any line to any mic channel), < 70 dB (20 to 20 kHz) |
| Headroom above +4 dBu: | > 18 dB |
Network to Line Level Interface Section |
|
| Outputs (2): | Balanced, detachable terminal block |
| Output Level: | +4 dBu (nominal) |
| Output Impedance: | 150 Ω balanced; 75 Ω unbalanced |
| Frequency Response: | 20 Hz to 20 kHz (± 0.5 dB) |
| THD+N: | < 0.05% |
| Noise below +4 dBu: | < -80 dB (output active); < -95 dB (outputs muted) |
| Crosstalk: | < 85 dB (20 Hz to 20 kHz) |
| Headroom above +4 dBu: | > 18 dB |
| Selectors (2): | MIC or LINE (rear panel) |
| Indicators (9): | Power In (1); Output Signal LEDs (2); Input Signal LEDs (2); Network Sys and Sync (2), Ethernet Link and Speed (2) |
| Power Connections (2): | Power Jack; Detachable Terminal Block |
| Ambient Operating Environment: | 0° C to 40° C |
| Power Requirement: | 24 Vdc @ 175 mA plus connected phantom loads, or PoE (RU-MLB2P) |
| PoE (RU-MLB2P): | Class 0, IEEE 802.3af |
| Dimensions: | 5.8" (15 cm) W; 1.7" (4.3 cm) H; 5.2" (13.2 cm) D |
| Package Type: | Cardboard Box |
| Package Dimensions: | 6 x 6 x 2.625 in. |
| Shipping Weight: | 1.799 lbs. (RU-MLB2); 1.799 lbs. (RU-MLB2P) |
| WEEE weight: | 1.539 lbs. (RU-MLB2); 1.539 lbs. (RU-MLB2P) |
| Tariff code: | 8543.70.9100 |
