Imágenes adicionales

DSP Expansion Cards

Symetrix I/O card for Edge/Radius NX, 4 digital in, AES/EBU or S/PDIF (pieza)


Código: 38-4 Channel Digital In Card

4 Channel Digital Input Card

  • 4 channels (2 stereo pairs).
  • Pro or consumer – AES/EBU or S/PDIF.
  • Connect to any source – sample rate converts 12 to 192 kHz input signal to 48k internal clock.
  • Level matching – +/-24dB digital trim.
  • Field swappable by qualified technicians.

General Specifications

Number of Inputs

Two (2) pairs of switchable AES or S/PDIF format (4 channels total).

Connectors

3.81 mm terminal blocks.

Nominal Input Level

-20 dBFS (+4 dBu with 20 dB of headroom).

Maximum Input Level

0 dBFS (+24 dBu)

Input Impedance

110 Ohms (AES), 75 Ohms (S/PDIF).

Dynamic Range

> 128 dB, unweighted.

THD + Noise

< -125 dB, unweighted.

Nominal Sample Rate

48 kHz.

Sample Rate Sync Range

12 to 192 kHz.

Latency

2.1 mS @ 48 kHz.

Mechanical Data

Shipping Weight

1 lbs. (0.45 kg)

Certifications or Compliance

EN 55103-1, EN 55103-2, FCC Part 15, RoHS.

Architect and Engineer Specifications: SymNet 4 Channel Digital Input Card.

The device shall provide two pairs of digital inputs (4 channels total) to an EDGE or RADIUS AEC frame that are adjustable with fine trim and selectable in format between AES or S/PDIF.

Up to four of these devices may be installed in a single EDGE frame for up to sixteen channels of local input and up to one of these devices may be installed in a single RADIUS AEC frame for up to four channels of local input. Levels, mutes, inversions and formats shall be controllable via software. Audio inputs shall be accessed via rear panel 3.81 mm terminal block connectors.

Audio conversion shall be 24-bit, 48 kHz with ability to accept 12 to 192 kHz using a sample rate conversion. The dynamic range shall not be lower than 128 dB, unweighted with a maximum input level of 0 dBFS (+24 dBu).

The device shall comply with CE and FCC Part 15 emissions limits. The device shall be RoHS compliant. The mounting plate shall be constructed of cold rolled steel, and mount into a SymNet Radius AEC or EDGE frame I/O card slot. The device shall be a Symetrix SymNet 4 Channel Digital Input Card.